tisdag 3 mars 2015

Starboard gunwale

Added distances for the inwales and the oak cap for the gunwale

Then I mocked up the inwales so that I could mark how much to take off the top of the sidearms. 


Finally I started the hard but satisfying work of planing down the gunwales to the ply edge. Port side is almost there..


Next step is to do a lot of sanding of the interior, so that I can coat it before I fit the inwales. Not too much epoxy left, so I have to take a trip to NM Epoxy again and buy some more. 

2 kommentarer: